ABSTRACT
Anemia of neonate,especially in premature infants,is a common phenomenon in newborns and has attracted more and more attention in the academic world.There are various reasons for anemia.Besides the common pathophysiological basis such as iron deficiency and erythropoietin deficiency,blood group incompatibility,hemolysis and iatrogenic blood loss are also important factors leading to anemia of neonates.Preventive measures for neonatal ane-mia include delayed ligation of the umbilical cord,the application of erythropoietin and the effective reduction of iatro-genic blood loss.At present,blood transfusion is still one of the main treatments for neonatal anemia.However,there are still controversies about transfusion indications as well as it′s short-term and long-term side effects.
ABSTRACT
Objective:To establish the quality control method of electrosurgical unit(ESU) through the safety performance test and data analysis for electrotome.Methods: According to the testing standard of ESU, Fluke ESA612 electrical safety analyzer and QA-ES II electrosurgery unit analyzer were applied to test the properties of ESU were using during 2015 and 2016, and the testing results were analyzed.Results:In 2015 and 2016, the qualified rate of quality control results were 79% and 81%, respectively; the problems of unqualified ESU were resolved and their hidden risks in clinical applications were eliminated.Conclusion: By testing the properties of ESU, we can master the performance of the machine; find and deal with the risk of machine in time, and avoid the hidden danger and enhance the risk management for ESU, so that the machine can be safely and effectively applied in clinical surgery.
ABSTRACT
Objective: The purpose of the current study was to investigate the correction coefficient of the characterizations of multi-detector CT (MDCT). Methods: The dose profile of Siemens SOMATOM Definition Flash CT scanner was measured with CT-SD 16 detector under the conditions of different collimations, pitches and tube voltages in phantoms of different diameters, and the ratio between weighted CTDI∞and weighted CTDI100 was calculated. Results:The ratio between weighted CTDI∞and weighted CTDI100, which is growing for increasing beam collimation, was found to range from 1.123 to 1.162 in head phantom and range from 1.118 to 1.173 in body phantom. Conclusion: For MDCT, the use of CTDI100, which is one of the most commonly used characterizations of CT, has always underestimated the levels of radiation dose. Therefore, CTDI100 should be corrected.
ABSTRACT
Objective:To correct the characterizations of MDCT radiation dose by exploring the relationship between CTDIw,∞ and CTDIw.Methods: CTDI100 and CTDI∞ were measured under the conditions of different collimations, pitches and tube voltages of Siemens Definition Flash CT, and CTDIw and CTDIw,∞ were calculated.Results: There were significant differences between CTDIw and CTDIw,∞ which were measured at 0.05 level. And there were no significant differences between CTDIw,∞ after corrected and CTDIw,∞ which were measured at 0.05 level.Conclusion:The characterizations of MDCT which were commonly used were not accurate enough. The result after correction were very closed to the real CTDIw,∞. This showed that the method to correct CTDIw of Siemens Definition Flash CT was mostly accurate. And methods to correct CTDIw of other MDCT needed to be further studied.
ABSTRACT
Objective:To investigate the dependence of geometric efficiency (GE) on beam collimation and tube voltage.Methods: The dose profile was measured under the conditions of different collimations and tube voltages and GE was calculated.Results: GE was found to be from 11% to 68%, GE at central position and periphery were found to range from 11% to 49% and 16% to 68% respectively, and weighted GE was found to be from 17% to 58%. GE was increased with beam collimation, while it was less pronounced on tube voltages.Conclusion:The dependence of GE on collimation was significant. Therefore, operators should choose appropriate collimations to reduce the dose burden of patients in CT examinations.